Features of spot type UV LED irradiator

▲High-efficiency machine is easy to operate

• ◆One unit can independently control the ON/OFF and irradiation time of 4 channels.
• ◆You can also use the 8332A head using a conversion cable.

▲Achieve high irradiance of 18,000mW/cm2*1

• ◆Using high-power LED and unique optical design to achieve high power.

▲25W low power consumption, 20,000 hours long life*2

• ◆Compared with lamp type*3, operating costs can be significantly reduced.

▲Equipped with I/O port and RS-232C communication.

• ◆Irradiation mode can be controlled through external control.

*1 When using 365nm, φ3mm condenser lens, WD: 5.5mm, medium radiant flux level LED
*2 Excluding 280nm
*3 Comparison with lamp-type light sources of products we purchased (based on our research, January 2021)

Power consumption: 25W for this product, 200W for the lamp type. Light source life: 20,000 hours for this product, 2,000 hours for the lamp type.

irradiation changes

▲The most suitable head can be selected according to the installation environment

• ◆”Standard head” with excellent heat dissipation housing design and stable performance
• ◆The “small head” adopts a lightweight and compact design, which can save installation space*

  *When using AC8375-280 and small head, please use the included cooling block.

  

▲4 wavelengths can be selected according to the workpiece

• ◆280nm、365nm、385nm、405nm

▲The best irradiation form can be selected according to the bonding conditions

• ◆”Spot lens” that achieves optimal irradiation with 6 spot sizes.

• ◆”Line lens” for optimal irradiation with three line sizes.