Customized request example

▲Irradiate specific wavelengths

• ◆Want to irradiate two wavelengths at the same time
  ◆It is hoped that the appropriate wavelength can be selected for irradiation based on the light absorption sensitivity of the initiator.
  ◆I hope to use different wavelengths to cure the deep layer and surface layer separately.
  ◆Want to use visible light to cure materials.
  ◆Want to use deep UV wavelengths.

▲Irradiate UV according to the shape of the workpiece and the coating range of the UV curable material

• ◆I hope to irradiate a large area of ​​2m x 1m at one time.
  ◆Please do not expose ultraviolet rays to areas other than those where the sealant is applied.
  ◆I want to irradiate two places on a workpiece with ultraviolet rays.
  ◆Because it needs to be installed in a vacant space of existing equipment, the external dimensions are limited.

▲UV exposure must be done from a distance

• ◆Since there is glass between the UV irradiator and the workpiece, the irradiation distance must be kept at a certain distance.
  ◆Want to perform ultraviolet irradiation while avoiding equipment interference.
  ◆Since there are taller parts installed on the workpiece, the irradiation distance needs to be separated.
  ◆Considering the ripple interference of the film, it is hoped to increase the irradiation distance in advance.

▲Other requirements

• ◆Want to specify the upper limit and lower limit of irradiance.
  ◆Want to ensure a high degree of consistency.
  ◆Hope to use it in high temperature environment.
  ◆I want to use compressed air to cool the UV irradiator.
  ◆It is hoped that ultraviolet rays will be irradiated at the same time when cleaning with nitrogen.
  ◆Hopefully applicable to clean room environment.
  ◆I want to use parallel light for pattern making.

If you have other customization needs, please contact us!